Installation instructions for the electric pump of the Quickshift gearbox

Installation instructions for the electric pump of the Quickshift gearbox

The installation of an electric pump is a crucial step to ensure the proper functioning of your Quickshift gearbox. This guide will walk you through each step of the process, providing practical tips for a successful installation.

Required Equipment

  • New electric pump (available at leverandco.eu)
  • Set of keys and screwdrivers
  • Protective gloves
  • Suitable hydraulic oil
  • Diagnostic case (optional)

Installation Steps

1. Vehicle Preparation

Make sure the vehicle is parked on a flat and secure surface. Turn off the engine and wear protective gloves to avoid injury.

2. Access to the Electric Pump

Locate the current electric pump in the engine compartment or under the vehicle, depending on the model. Remove necessary parts to access it.

3. Removal of the Old Electric Pump

Loosen hydraulic and electrical connections, then carefully remove the defective electric pump.

4. Installation of the New Electric Pump

Position the new electric pump and reconnect hydraulic and electrical fittings, ensuring they are securely tightened.

5. Filling and Testing

Fill the system with the appropriate hydraulic oil. Use a diagnostic case to purge air from the system and check the proper functioning of the electric pump.

Tips for Successful Installation

  • Safety: Ensure all connections are securely fastened to prevent leaks.
  • Maintenance: Regularly check the hydraulic oil level and the condition of connections.
  • Tutorials: Refer to additional videos or guides if necessary for visual instructions.

Continue with Your Automotive Passion

Proper installation of an electric pump is essential for the performance of your Quickshift gearbox. For more information or to purchase parts, visit our website leverandco.eu.

Back to blog